Installing the Motherboard.
a. Prepare screws used and screwdriver, then attach your motherboard correctly on the stand provided.
b. Strengthen (rotate clockwise) all the screws used for the motherboard is good and right.
1. Prepare Hard Drive
a. Take your hard drive, and note the jumper. In the jumper will there is a choice Master, Slave or Cable Select. This information can be found on the surface of the disk. (Usually already installed in the master position)
b. Attach jumper in accordance with the desired position. If you need to prepare a pair of tweezers to pull out and put the jumper on the hard drive.
Tidak ada komentar:
Posting Komentar